NEW-CONSENS LMP9 Multi Path Ultrasonic Flowmeter DN600-DN3000 for Large Water Transmission Mains

NEW-CONSENS LMP9 Multi Path Ultrasonic Flowmeter – 2026 New Launch

New 2026 release: a four-path ultrasonic flowmeter for DN600-DN3000 water mains that averages the velocity profile across the pipe for custody-transfer grade accuracy.

On a DN2000 raw water main, a single-path meter can be several percent wrong because the velocity profile after a bend or a partly closed valve is never flat. The LMP9 uses four ultrasonic paths distributed across the pipe section to measure the real profile, then integrates it, which is why multi-path meters are the accepted choice for custody transfer and billing on large transmission mains.

Why This New Launch Is Worth Switching To

• Four-path measurement averages the velocity profile, holding ±0.5% accuracy even with short upstream straight length.
• Path configuration can be crossed or parallel depending on the installation geometry, so existing chambers can usually be reused.
• IP68 insertion transducers are installed through the pipe wall and can be serviced without removing the spool.
• Built-in 128 MB logger keeps five years of hourly flow and totaliser data for billing audit.

Key Design Features

• Automatic path health monitoring flags a failed transducer or a gas pocket before the reading drifts.
• Converter supports 4-20 mA, pulse, HART and Modbus RTU simultaneously for SCADA, billing and telemetry.
• Hydraulic profile correction factors for bends, reducers and valves are selectable in the converter.
• 85-265V AC wide range supply with 24V DC option for solar and battery-backed sites.

Technical Specifications

Typical Applications

• Municipal raw water and treated water transmission mains from DN600 to DN3000.
• Inter-company water transfer where billing accuracy is contractually specified.
• Hydropower and cooling water conduits with disturbed flow profiles.

Ordering Information

Send us the pipe dimensions, material, upstream and downstream straight lengths, flow range and required accuracy class, and our project team will return a path layout drawing and quotation within two working days.