Highlight:
                                                                                                                                                                                                                                                                                                                                                                                                            HART 7 temperature transmitter with high accuracy, isolated temperature converter slimline housing, pre-calibrated temperature transmitter selectable response time
                      

User Memory:	48 MB	Availability:	In Stock
Hs Code:	85389091	Thread:	NPT
Load Resistance:	0 To 1,440 Ohms	Storage Temperature:	-40 To 70°C (-40 To 158°F)
Coo:	Yes	Resolution:	12 Bit X 12 Bit
Product No:	VE3006	Housing Material:	Aluminum Or Stainless Steel
Supply Voltage:	10.8 To 42.4 Vdc At Terminals	Actuator Type:	Side Rotary - No Lever
Stage Design:	Stage Design With Dry Torque Motor	Output:	4-20mADC/1-5VDC
Products Name:	Differential Pressure Transmitter

User Memory:	48 MB
Availability:	In Stock
Hs Code:	85389091
Thread:	NPT
Load Resistance:	0 To 1,440 Ohms
Storage Temperature:	-40 To 70°C (-40 To 158°F)
Coo:	Yes
Resolution:	12 Bit X 12 Bit
Product No:	VE3006
Housing Material:	Aluminum Or Stainless Steel
Supply Voltage:	10.8 To 42.4 Vdc At Terminals
Actuator Type:	Side Rotary - No Lever
Stage Design:	Stage Design With Dry Torque Motor
Output:	4-20mADC/1-5VDC
Products Name:	Differential Pressure Transmitter

HART 7 Temperature Converter PR 3113 High accuracy 0.05% Slimline housing 6.1 mm Excellent EMC performance

HART 7 Temperature Converter - Isolated

PR 3113

Key Features

High accuracy, better than 0.05% of span
Slimline housing of 6.1 mm
Excellent EMC performance
Selectable 60 ms / 60 s response time
Pre-calibrated for immediate use

Environmental Conditions

Operating temperature	-25°C to +70°C
Storage temperature	-40°C to +85°C
Calibration temperature	20...28°C
Relative humidity	< 95% RH (non-cond.)
Protection degree	IP20
Installation in	Pollution degree 2 & meas. / overvoltage cat. II

Mechanical Specifications

Dimensions (HxWxD)	113 x 6.1 x 115 mm
Weight approx.	70 g
DIN rail type	DIN EN 60715/35 mm
Wire size	0.13...2.5 mm² / AWG 26...12 stranded wire
Screw terminal torque	0.5 Nm
Vibration	IEC 60068-2-6 2...25 Hz: ±1.6 mm 25...100 Hz: ±4 g

Common Specifications

Supply

Supply voltage	16.8...31.2 VDC
Max. required power	0.70 W
Max. power dissipation	0.70 W

Isolation Voltage

Isolation voltage, test / working	2.5 kVAC / 300 VAC (reinforced)
Zone 2 / Div. 2	250 VAC

Performance

Response time HART mode	60 ms...60 s, programmable
Response time DIP mode	< 60 ms
Accuracy	Better than 0.05% of selected range
Signal / noise ratio	Min. 60 dB
Long-term stability	±0.1% of span / year (±0.3% of span / 5 years)
Programming	DIP switches
Signal dynamics, input	23 bit
Signal dynamics, output	18 bit
EMC immunity influence	< ±0.5% of span
Extended EMC immunity	< ±1% of span
Incorrect DIP-switch setting identification	3.5 mA output; LED 0.5 s / 1 Hz

Input Specifications

RTD Input

Temperature range, Pt100	-200...+850°C
Min. measurement range (span)	10°C
Accuracy	Better than 0.05% of span or 0.1°C
Temperature coefficient	0.02°C/°C or ≤ ±0.01%/°C
Sensor current	< 150 µA
Sensor cable resistance	< 50 Ω per wire
Effect of sensor cable resistance (3-/4-wire)	< 0.002 Ω / Ω
Sensor error detection	Yes - selectable via DIP-switch
Broken sensor detection	> 800 Ω
Shorted sensor detection	< 18 Ω

TC Input

Temperature range, TC J	-100...+1200°C
Temperature range, TC K	-180...+1372°C
Min. measurement range (span) - TC J & K	50°C
Accuracy	Better than 0.05% of span or 0.5°C
Temperature coefficient	0.1°C/°C or ≤ ±0.01%/°C
Sensor cable resistance	< 5 kΩ per wire
Cold junction compensation (CJC): Accuracy @ external Pt100 input	Better than ±0.15°C
Cold junction compensation (CJC): Accuracy @ internal CJC	Better than ±2.5°C
Internal CJC error detection	Yes
External CJC error detection	Yes - selectable via DIP-switch
Open Thermocouple detection	Yes - selectable via DIP-switch

Output Specifications

Current Output

Signal range	0...23 mA
Programmable signal ranges	4...20 and 20...4 mA
Load (@ current output)	≤ 600 Ω
Load stability	≤ 0.01% of span / 100 Ω
Sensor error indication	3.5 mA or 23 mA / acc. to NAMUR NE43 or OFF
Open output	< 20 V
HART protocol revisions	HART 7
Updating time	10 ms

Intrinsic Safety & Ex Marking

ATEX	II 3 G Ex ec IIC T4 Gc
IECEx	Ex ec IIC T4 Gc
FM, US	Cl. I, Div. 2, Gp. A, B, C, D T4 or Cl. I, Zone 2, AEx nA IIC T4
FM, CA	Cl. I, Div. 2, Gp. A, B, C, D T4 or Cl. I, Zone 2, Ex nA IIC T4
EAC Ex	2Ex nA IIC T4 Gc X

Compliance & Approvals

Observed Authority Requirements

EMC	2014/30/EU & UK SI 2016/1091
LVD	2014/35/EU & UK SI 2016/1101
ATEX	2014/34/EU & UK SI 2016/1107
RoHS	2011/65/EU & UK SI 2012/3032
EAC	TR-CU 020/2011
EAC Ex	TR-CU 012/2011

Certification Approvals

ATEX	KEMA 10ATEX0147 X
IECEx	KEM 10.0068X
UKEX	DEKRA 21UKEX0055X
c FM us	FM17US0004X / FM17CA0003X
c UL us, UL 61010-1	E314307
EAC Ex	EAEU KZ 7500361.01.01.08756
DNV Marine	TAA00001RW