Shaanxi Qindiyuan Environmental Protection Equipment Co., Ltd.
leonleesale@aliyun.com 86--15389206502
상품
상품
> 상품 > Signal Transmitter > PR 4116 Universal Transmitter 4-20mA Output For Current Voltage 2 Relays

PR 4116 Universal Transmitter 4-20mA Output For Current Voltage 2 Relays

제품 상세정보

원래 장소: 덴마크

브랜드 이름: PR

인증: CO

모델 번호: PR 4116

문서: 4116v106_uk.pdf

지불과 운송 용어

최소 주문 수량: 1

가격: 150-300usd

배달 시간: 5-7 근무일

지불 조건: 티/티

공급 능력: 99pcs 4-6 주

지금 챗팅하세요
강조하다:

PR 4116 Universal Transmitter

,

Universal Transmitter 4-20mA

,

Universal Transmitter PR 4116

연결 유형:
1/4 인치 NPT
애플리케이션:
산업 공정 제어, HVAC, 유압 시스템
출력신호:
4-20 MA
재료:
스테인레스 스틸
측정 범위:
0~1000psi
응답 시간:
≤ 1초
보호등급:
IP65
작동 온도:
-20°C ~ 80°C
압력 유형:
게이지, 절대, 차동
제품명:
압력 측정 장치
구경 측정:
공장에서 교정됨
표시 유형:
디지털 LCD
전원 공급 장치:
24 v DC
정확성:
±0.5%
장착 옵션:
패널 실장, 벽 실장
연결 유형:
1/4 인치 NPT
애플리케이션:
산업 공정 제어, HVAC, 유압 시스템
출력신호:
4-20 MA
재료:
스테인레스 스틸
측정 범위:
0~1000psi
응답 시간:
≤ 1초
보호등급:
IP65
작동 온도:
-20°C ~ 80°C
압력 유형:
게이지, 절대, 차동
제품명:
압력 측정 장치
구경 측정:
공장에서 교정됨
표시 유형:
디지털 LCD
전원 공급 장치:
24 v DC
정확성:
±0.5%
장착 옵션:
패널 실장, 벽 실장
PR 4116 Universal Transmitter 4-20mA Output For Current Voltage 2 Relays
Universal Transmitter
PR 4116
Key Features
  • Input for RTD, TC, Ohm, potentiometer, mA and V
  • 2-wire supply > 16 V
  • FM-approved for installation in Division 2
  • Output for current, voltage and 2 relays
  • Universal AC or DC power supply
Environmental Conditions
Operating temperature -20°C to +60°C
Storage temperature -20°C to +85°C
Calibration temperature 20...28°C
Relative humidity < 95% RH (non-condensing)
Protection degree IP20
Mechanical Specifications
Dimensions (HxWxD) 109 x 23.5 x 104 mm
Dimensions (HxWxD) with PR 4500 109 x 23.5 x 131 mm
Weight approx. 175 g
Weight incl. 4501 / 451x (approx.) 190 g / 205 g
Wire size 0.13...2.08 mm² AWG 26...14 stranded wire
Screw terminal torque 0.5 Nm
Vibration IEC 60068-2-6
2...13.2 Hz: ±1 mm
13.2...100 Hz: ±0.7 g
Common Specifications
Supply
Supply voltage, universal 21.6...253 VAC, 50...60 Hz or 19.2...300 VDC
Fuse 400 mA SB / 250 VAC
Max. required power ≤ 2.5 W
Max. power dissipation ≤ 2.5 W
Isolation Voltage
Test voltage 2.3 kVAC
Working voltage 250 VAC (reinforced) / 500 VAC (basic)
Response Time
Temperature input (0...90%, 100...10%) ≤ 1 s
mA / V input (0...90%, 100...10%) ≤ 400 ms
Performance Characteristics
Signal dynamics, input 24 bit
Signal dynamics, output 16 bit
Signal / noise ratio Min. 60 dB (0...100 kHz)
Accuracy Better than 0.1% of selected range
EMC immunity influence < ±0.5% of span
Extended EMC immunity: NAMUR NE21, A criterion, burst < ±1% of span
Input Specifications
RTD Input
RTD type Pt10/20/50/100/200/250; Pt300/400/500/1000; Ni50/100/120/1000; Cu10/20/50/100
Cable resistance per wire 50 Ω (max.)
Sensor current Nom. 0.2 mA
Effect of sensor cable resistance (3-/4-wire) < 0.002 Ω / Ω
Sensor error detection Yes
Short circuit detection < 15 Ω
Thermocouple Input
Thermocouple type B, E, J, K, L, N, R, S, T, U, W3, W5, LR
Cold junction compensation (CJC) via external sensor in 5910 20...28°C ≤ ±1°C, -20...20°C / 28...70°C ≤ 2°C
CJC via internal mounted sensor ±(2.0°C + 0.4°C * Δt)
Sensor error detection Yes
Current and Voltage Inputs
Current input measurement range 0...23 mA
Programmable current ranges 0...20 and 4...20 mA
Voltage input measurement range 0...12 VDC
Programmable voltage ranges 0/0.2...1, 0/1...5, 0/2...10 VDC
Output Specifications
Current Output
Signal range 0...23 mA
Programmable signal ranges 0...20/4...20/20...0/20...4 mA
Load (@ current output) ≤ 800 Ω
Output limitation 3.8...20.5 mA (4...20 and 20...4 mA signals)
0...20.5 mA (0...20 and 20...0 mA signals)
Relay Output
Relay functions Setpoint, Window, Sensor error, Latch, Power and Off
Max. voltage 250 VAC / VDC
Max. current 2 A
Max. AC power 500 VA
Certifications and Approvals
c UL us, UL 508 E231911
FM 3025177
DNV Marine TAA0000101
EU RO MR Type Approval MRA000000Z
SIL Hardware assessed for use in SIL applications
Compliance Standards
EMC 2014/30/EU & UK SI 2016/1091
LVD 2014/35/EU & UK SI 2016/1101
RoHS 2011/65/EU & UK SI 2012/3032
EAC TR-CU 020/2011
EAC LVD TR-CU 004/2011