제품 상세정보
브랜드 이름: WINTERS
모델 번호: PEM-40
문서: pem.pdf
지불과 운송 용어
최소 주문 수량: 1
가격: 25USD
배달 시간: 1~2주
지불 조건: 티/티
공급 능력: 1PC 1-2주
|
장착 옵션:
|
패널 마운트, 벽 마운트, 파이프 마운트
|
출력신호:
|
4~20mA, 0~10V, 디지털
|
정확성:
|
전체 규모의 ±0.5%
|
측정 범위:
|
0~1000psi
|
전원 공급 장치:
|
24V DC, 배터리 구동
|
보호등급:
|
IP65, IP67
|
표시 유형:
|
아날로그 다이얼, 디지털 LCD
|
구경 측정:
|
공장 교정, 현장 교정 가능
|
작동 온도:
|
-20°C ~ 80°C
|
애플리케이션:
|
산업, HVAC, 자동차, 석유 및 가스
|
응답 시간:
|
1/2 이하
|
압력 유형:
|
게이지, 절대, 차동
|
재료:
|
스테인레스 스틸, 황동
|
제품명:
|
압력 측정 장치
|
연결 유형:
|
스레드, 플랜지
|
|
장착 옵션:
|
패널 마운트, 벽 마운트, 파이프 마운트
|
|
출력신호:
|
4~20mA, 0~10V, 디지털
|
|
정확성:
|
전체 규모의 ±0.5%
|
|
측정 범위:
|
0~1000psi
|
|
전원 공급 장치:
|
24V DC, 배터리 구동
|
|
보호등급:
|
IP65, IP67
|
|
표시 유형:
|
아날로그 다이얼, 디지털 LCD
|
|
구경 측정:
|
공장 교정, 현장 교정 가능
|
|
작동 온도:
|
-20°C ~ 80°C
|
|
애플리케이션:
|
산업, HVAC, 자동차, 석유 및 가스
|
|
응답 시간:
|
1/2 이하
|
|
압력 유형:
|
게이지, 절대, 차동
|
|
재료:
|
스테인레스 스틸, 황동
|
|
제품명:
|
압력 측정 장치
|
|
연결 유형:
|
스레드, 플랜지
|
| Parameter | Value Type |
|---|---|
| Ultra-small / Cable type Sensing range | 40 mm (fixed) |
| Minimum sensing object | 2 * 2 mm opaque object |
| Hysteresis | 0.5 mm or less |
| Repeatability | 0.05 mm or less |
| Supply voltage | 5 to 24 V DC ±10 % (Ripple P-P 10 % or less) |
| Current consumption | 15 mA or less |
| Output - NPN type | NPN open-collector transistor |
| Output - PNP type | PNP open-collector transistor |
| Max sink current (NPN) | 50 mA |
| Max source current (PNP) | 50 mA |
| Applied voltage (NPN) | 30 V DC or less (between output and 0 V) |
| Applied voltage (PNP) | 30 V DC or less (between output and +V) |
| Residual voltage (50 mA) | 2 V or less |
| Residual voltage (16 mA) | 1 V or less |
| Output operation | Incorporated with 2 outputs: Light-ON / Dark-ON |
| Short-circuit protection | Incorporated |
| Response time (light interrupted) | 80 μs or less |
| Response time (light received) | 20 μs or less |
| Max response frequency | 3 kHz |
| Operation indicator | Orange LED (lights up under light received condition) |
| Pollution degree | 3 |
| Protection | IP64 (IEC) |
| Ambient illuminance | Fluorescent light: 1,000 ℓx at the light-receiving face |
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Vibration resistance | 10 to 2,000 Hz frequency, 1.5 mm double amplitude (max acceleration 196 m/s²) in X, Y and Z directions for two hours each |
| Shock resistance | 15,000 m/s² acceleration (1,500 G approx.) in X, Y and Z directions three times each |
| Emitting element | Infrared LED (Peak emission wavelength: 855 nm, non-modulated) |
| Material - Enclosure | PBT |
| Material - Display section | Polycarbonate |
| Cable (standard) | 0.09-mm² 4-core cabtyre cable, PVC, 1 m long |
| Cable (bending-resistant) | 0.1-mm² 4-core bending-resistant cabtyre cable, PVC, 1 m long |
| Cable (3m) | 0.09-mm² 4-core cabtyre cable, PVC, 3 m long |
| Cable extension | Extension up to total 100 m is possible with 0.3 mm², or more, cable |
| Weight (standard) | Net weight: 10 g approx., Gross weight: 15 g approx. |
| Weight (bending-resistant) | Net weight: 30 g approx., Gross weight: 35 g approx. |