Shaanxi Qindiyuan Environmental Protection Equipment Co., Ltd.
leonleesale@aliyun.com
86--15389206502
Produktdetails
Herkunftsort: DENMARK
Markenname: PR
Zertifizierung: CO
Modellnummer: PR 6335D
Dokumentieren: 6335v111_uk.pdf
Zahlungs-u. Verschiffen-Ausdrücke
Min Bestellmenge: 1
Preis: 200-400usd
Lieferzeit: 5-7 Werktage
Zahlungsbedingungen: T/T
Versorgungsmaterial-Fähigkeit: 99 Stück 4-6 Wochen
|
Genauigkeit:
|
± 0,5% der gesamten Skala
|
Montage:
|
Schalttafelmontage oder Rohrmontage
|
Drucktyp:
|
Gauge, Absolutwert, Differential
|
Anwendung:
|
Industrie, Klimaanlage, Automobilindustrie
|
Material:
|
Edelstahl
|
Kalibrierung:
|
Werkseitig kalibriert
|
Produktname:
|
Druckmessgeräte
|
Verbindungstyp:
|
1/4 Zoll NPT
|
Betriebstemperatur:
|
-20°C zu 85°C
|
Stromversorgung:
|
24 V DC
|
Schutzbewertung:
|
IP65
|
Anzeigetyp:
|
Digitales LCD
|
Reaktionszeit:
|
≤ 1 ms
|
Messbereich:
|
0 bis 1000 psi
|
Ausgangssignal:
|
4–20 mA, 0–10 V
|
|
Genauigkeit:
|
± 0,5% der gesamten Skala
|
|
Montage:
|
Schalttafelmontage oder Rohrmontage
|
|
Drucktyp:
|
Gauge, Absolutwert, Differential
|
|
Anwendung:
|
Industrie, Klimaanlage, Automobilindustrie
|
|
Material:
|
Edelstahl
|
|
Kalibrierung:
|
Werkseitig kalibriert
|
|
Produktname:
|
Druckmessgeräte
|
|
Verbindungstyp:
|
1/4 Zoll NPT
|
|
Betriebstemperatur:
|
-20°C zu 85°C
|
|
Stromversorgung:
|
24 V DC
|
|
Schutzbewertung:
|
IP65
|
|
Anzeigetyp:
|
Digitales LCD
|
|
Reaktionszeit:
|
≤ 1 ms
|
|
Messbereich:
|
0 bis 1000 psi
|
|
Ausgangssignal:
|
4–20 mA, 0–10 V
|
| Operating temperature | -40°C to +85°C |
|---|---|
| Storage temperature | -40°C to +85°C |
| Calibration temperature | 20...28°C |
| Relative humidity | < 95% RH (non-condensing) |
| Protection degree | IP20 |
| Dimensions (HxWxD) | 109 x 23.5 x 104 mm |
|---|---|
| Weight (1 / 2 channels) | 145 / 185 g |
| DIN rail type | DIN EN 60715/35 mm |
| Wire size | 0.13...2.08 mm² AWG 26...14 stranded wire |
| Screw terminal torque | 0.5 Nm |
| Supply voltage | 8.0...30 VDC |
|---|---|
| Internal power dissipation, 1 / 2 ch. | 19 mW...0.7 / 1.4 W |
| Isolation voltage, test / working | 1.5 kVAC / 50 VAC |
|---|
| Response time (programmable) | 1...60 s |
|---|---|
| Voltage drop | 8.0 VDC |
| Warm-up time | 30 s |
| Programming | HART & PR 5909 Loop Link communications interface |
| Signal / noise ratio | Min. 60 dB |
| Accuracy | Better than 0.05% of selected range |
| Signal dynamics, input | 22 bit |
| Signal dynamics, output | 16 bit |
| Effect of supply voltage change | < 0.005% of span / VDC |
| Max. offset | 50% of selected max. value |
|---|
| RTD type | Pt100, Ni100, lin. R |
|---|---|
| Cable resistance per wire | 5 Ω (up to 50 Ω per wire is possible with reduced measurement accuracy) |
| Sensor current | Nom. 0.2 mA |
| Effect of sensor cable resistance (3-/4-wire) | < 0.002 Ω / Ω |
| Sensor error detection | Yes |
| Linear resistance min....max. | 0 Ω...7000 Ω |
|---|
| Thermocouple type | B, E, J, K, L, N, R, S, T, U, W3, W5 |
|---|---|
| Cold junction compensation (CJC) | < ±1.0°C |
| Sensor error detection | Yes |
| Sensor error current: When detecting / else | Nom. 33 μA / 0 μA |
| Measurement range | -800...+800 mV |
|---|---|
| Min. measurement range (span) | 2.5 mV |
| Input resistance | 10 MΩ |
| Signal range | 4…20 mA |
|---|---|
| Min. signal range | 16 mA |
| Load (@ current output) | ≤ (Vsupply - 8) / 0.023 [Ω] |
| Load stability | ≤ 0.01% of span / 100 Ω |
| Sensor error indication | Programmable 3.5…23 mA |
| NAMUR NE43 Upscale/Downscale | 23 mA / 3.5 mA |
| Updating time | 440 ms |
|---|---|
| of span | = of the presently selected range |
| EMC | 2014/30/EU & UK SI 2016/1091 |
|---|---|
| ATEX | 2014/34/EU & UK SI 2016/1107 |
| RoHS | 2011/65/EU & UK SI 2012/3032 |
| EAC | TR-CU 020/2011 |
| EAC Ex | TR-CU 012/2011 |
| ATEX | DEKRA 20ATEX0108X |
|---|---|
| IECEx | DEK 20.0063X |
| CSA | 1125003 |
| FM | FM17US0013X |
| INMETRO | DEKRA 23.0011X |
| EAC Ex | EAEU KZ 7500361.01.01.08756 |
| SIL | Hardware assessed for use in SIL applications |
