Shaanxi Qindiyuan Environmental Protection Equipment Co., Ltd.
leonleesale@aliyun.com 86--15389206502
পণ্য
পণ্য
বাড়ি > পণ্য > Pressure Measurement Instruments‌ > WINTERS PEM-25 Standard Pressure Gauge 63mm Shaft Diameter

WINTERS PEM-25 Standard Pressure Gauge 63mm Shaft Diameter

পণ্যের বিবরণ

পরিচিতিমুলক নাম: WINTERS

মডেল নম্বার: PEM-25

দলিল: pem.pdf

পেমেন্ট ও শিপিংয়ের শর্তাবলী

ন্যূনতম চাহিদার পরিমাণ: 1

মূল্য: 20USD

ডেলিভারি সময়: 1-2 সপ্তাহ

পরিশোধের শর্ত: টি/টি

যোগানের ক্ষমতা: 1 পিসি 1-2 সপ্তাহ

এখন চ্যাট করুন
বিশেষভাবে তুলে ধরা:

63mm pressure gauge with warranty

,

standard pressure gauge for industrial use

,

PEM-25 pressure measurement instrument

পাওয়ার সাপ্লাই:
24 ভি ডিসি
নির্ভুলতা:
সম্পূর্ণ স্কেলের ±0.25%
ডিসপ্লে টাইপ:
এলসিডি/এলইডি
সংযোগের ধরন:
থ্রেডেড, ফ্ল্যাঞ্জড
অপারেটিং তাপমাত্রা:
-20°C থেকে 80°C
আবেদন:
শিল্প, HVAC, স্বয়ংচালিত, তেল ও গ্যাস
সুরক্ষা প্রদান:
IP65
পণ্যের নাম:
চাপ পরিমাপের যন্ত্র
চাপের ধরন:
পরিমাপক, পরম, ভিন্নতা
পরিমাপ পরিসীমা:
0 থেকে 1000 psi
আউটপুট সিগন্যাল:
4-20 mA, 0-10 V, ডিজিটাল
মাউন্টিং অপশন:
প্যানেল, ওয়াল, পাইপ
প্রতিক্রিয়া সময়:
≤ 1 মি.সে
উপাদান:
স্টেইনলেস স্টীল 316
পাওয়ার সাপ্লাই:
24 ভি ডিসি
নির্ভুলতা:
সম্পূর্ণ স্কেলের ±0.25%
ডিসপ্লে টাইপ:
এলসিডি/এলইডি
সংযোগের ধরন:
থ্রেডেড, ফ্ল্যাঞ্জড
অপারেটিং তাপমাত্রা:
-20°C থেকে 80°C
আবেদন:
শিল্প, HVAC, স্বয়ংচালিত, তেল ও গ্যাস
সুরক্ষা প্রদান:
IP65
পণ্যের নাম:
চাপ পরিমাপের যন্ত্র
চাপের ধরন:
পরিমাপক, পরম, ভিন্নতা
পরিমাপ পরিসীমা:
0 থেকে 1000 psi
আউটপুট সিগন্যাল:
4-20 mA, 0-10 V, ডিজিটাল
মাউন্টিং অপশন:
প্যানেল, ওয়াল, পাইপ
প্রতিক্রিয়া সময়:
≤ 1 মি.সে
উপাদান:
স্টেইনলেস স্টীল 316
WINTERS PEM-25 Standard Pressure Gauge 63mm Shaft Diameter
WINTERS PEM-25 Standard Pressure Gauge 63mm Shaft Diameter
Technical Specifications
Parameter Value
Sensing range 6 mm (fixed)
Minimum sensing object 0.8 * 1.2 mm opaque object
Hysteresis 0.05 mm or less
Repeatability 0.01 mm or less
Supply voltage 5 to 24 V DC ±10% (Ripple P-P 10% or less)
Current consumption 15 mA or less
Output - NPN type NPN open-collector transistor
Output - PNP type PNP open-collector transistor
Max sink current (NPN) 50 mA
Max source current (PNP) 50 mA
Applied voltage (NPN) 30 V DC or less (between output and 0 V)
Applied voltage (PNP) 30 V DC or less (between output and +V)
Residual voltage (50 mA) 2 V or less
Residual voltage (16 mA) 1 V or less
Output operation Incorporated with 2 outputs: Light-ON / Dark-ON
Short-circuit protection Incorporated
Response time (light interrupted) 80 μs or less
Response time (light received) 20 μs or less
Max response frequency 3 kHz
Operation indicator Orange LED (lights up under light received condition)
Pollution degree 3
Protection IP64 (IEC)
Ambient illuminance Fluorescent light: 1,000 ℓx at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 2,000 Hz frequency, 1.5 mm double amplitude (max acceleration 196 m/s²) in X, Y and Z directions for two hours each
Shock resistance 15,000 m/s² acceleration (1,500 G approx.) in X, Y and Z directions three times each
Emitting element Infrared LED (Peak emission wavelength: 855 nm, non-modulated)
Material - Enclosure PBT
Material - Display section Polycarbonate
Cable Options
  • Cable (standard): 0.09-mm² 4-core cabtyre cable, PVC, 1 m long
  • Cable (bending-resistant): 0.1-mm² 4-core bending-resistant cabtyre cable, PVC, 1 m long
  • Cable (3m): 0.09-mm² 4-core cabtyre cable, PVC, 3 m long
Extension up to total 100 m is possible with 0.3 mm², or more, cable
Weight Specifications
  • Weight (standard): Net weight: 10 g approx., Gross weight: 15 g approx.
  • Weight (bending-resistant): Net weight: 30 g approx., Gross weight: 35 g approx.