Shaanxi Qindiyuan Environmental Protection Equipment Co., Ltd.
leonleesale@aliyun.com 86--15389206502
محصولات
محصولات
خونه > محصولات > DMM دیجیتال مولتی متر > HIOKO AC Clamp Power Meter CM3286-50 Power Quality Meter, Industrial Clamp Meter Electrical Measurement Instrument

HIOKO AC Clamp Power Meter CM3286-50 Power Quality Meter, Industrial Clamp Meter Electrical Measurement Instrument

جزئیات محصول

محل منبع: ژاپن

نام تجاری: HIOKI

گواهی: CO

شماره مدل: گیره برق سنج HIOKO AC CM3286-50

شرایط پرداخت و حمل و نقل

مقدار حداقل تعداد سفارش: 1

قیمت: $499–$699

جزئیات بسته بندی: بسته بندی جعبه مقوایی استاندارد

زمان تحویل: 6-8 هفته

شرایط پرداخت: T/T

قابلیت ارائه: 99 عدد / 6-8 هفته

برجسته کردن:
تست سنسور شعله:
بله
عملکرد ضبط:
حداقل/حداکثر/میانگین
ارقام:
3-3/4
کالیبراسیون:
کالیبره شده کارخانه
توابع اندازه گیری:
مقاومت ، تداوم
امپدانس ورودی:
کم
حداکثر جریان ورودی:
10A (معمولا ذوب شده)
تکنیک اندازه گیری:
4 سیم 2×4 اهم
حداکثر ولتاژ ورودی:
600 ولت تا 1000 ولت (بسته به مدل)
ابعاد:
بسته به مدل، معمولاً اندازه دستی متفاوت است
قابلیت ضبط:
حداقل / حداکثر / میانگین با زمان سپری شده
وضوح رقومی:
5.5
محدوده ظرفیت:
100 mF
دسته بندی:
مولتی متر برق
نمایش نور پس زمینه:
LED سفید بزرگ
تست سنسور شعله:
بله
عملکرد ضبط:
حداقل/حداکثر/میانگین
ارقام:
3-3/4
کالیبراسیون:
کالیبره شده کارخانه
توابع اندازه گیری:
مقاومت ، تداوم
امپدانس ورودی:
کم
حداکثر جریان ورودی:
10A (معمولا ذوب شده)
تکنیک اندازه گیری:
4 سیم 2×4 اهم
حداکثر ولتاژ ورودی:
600 ولت تا 1000 ولت (بسته به مدل)
ابعاد:
بسته به مدل، معمولاً اندازه دستی متفاوت است
قابلیت ضبط:
حداقل / حداکثر / میانگین با زمان سپری شده
وضوح رقومی:
5.5
محدوده ظرفیت:
100 mF
دسته بندی:
مولتی متر برق
نمایش نور پس زمینه:
LED سفید بزرگ
HIOKO AC Clamp Power Meter CM3286-50 Power Quality Meter, Industrial Clamp Meter Electrical Measurement Instrument
Quickly check current, voltage, power, and power factor

Quickly check current, voltage, power, and power factor

  • Display 4 parameters
  • at the same time • Power meter with measurable power of 5W and current of 60mA; It can measure up to 360kW power from 5W at a low current of 60mA
  • In addition to current, voltage, and power, simple accumulated energy and phase sequence can be measured
  • Operating system that supports fast measurement
  • Measured values can be transferred to a smartphone by holding the data and data can be recorded
  • quickly • GENNECT Cross can be performed for the 1st time~ 30th High Harmonic Analysis (When Wireless Adapter Z3210 is Installed)
Product feature name

CAT IV 600,CATIII 1000V

Basic parameters (1 year for accuracy, 1 year for adjusted accuracy)

*1) Phase angle calculated from the zero crossover of current and voltage

*2) Harmonics can be displayed using the application software (GENNECT Cross).

Measure the line Single-phase, three-phase (balanced, no waveform distortion)
Measurement items Voltage, current, voltage/current waveform peak, active/apparent/reactive power, power factor, phase angle*1, frequency, simple single-phase power
[When installing the Z3210*2] Voltage/current harmonics
Voltage range [Measurement range] 80.0 V~600.0 V, single range, basic accuracy 45-66 Hz: ±0.7%rdg. ±3 dgt., (Frequency characteristics: 45-1 kHz, true RMS)
Current range [Measurement range] 0.060-600.0 A, 3 ranges, basic accuracy 45-66 Hz: ±1.3%rdg. ±3dgt., (Frequency characteristics: 45-1 kHz, true RMS)
Power range [Single Phase] 0.005 kW to 360.0 kW
Basic Accuracy: ±2.0% rdg. ±7 dgt. (50/60 Hz Power Factor=1)
[Balanced three-phase 3-wire] 0.020 kW to 623.5 kW
Basic accuracy: ±3.0% rdg. ±10 dgt. (50/60 Hz Power Factor=1)
[Balanced 3-phase 4-wire] 0.040 kW to 1080 kW
Basic accuracy: ±2.0% rdg. ±3 dgt. (50/60 Hz Power Factor=1)
Harmonics When installing the Z3210*2: 30th harmonic level/content/total harmonic distortion rate of voltage and current
Other features: [Phase Angle*1] Ahead -180.0°~ Delay 179.9°
[Power Factor] -1.000 ~ 1.000
[Harmonics] 45.0Hz~999.9Hz
Peak, Phase Inspection, Max/Min/Average Display, Auto Hold, Meter Comparison, Unbalanced Three-Phase Power Estimation Display, etc
Dust and water resistance IP20 (Voltage measurement in a completely dry state, with jaws closed) IP54 (when stored)
Power supply No. 7 Alkaline Battery (LR03) *2
Continuous use time: about 25 hours (without Z3210 installed), about 18 hours (with Z3210 installed and wireless communication)
Other conditions: AC 100 A measurement, backlight off, 23°C reference value
Measurable conductor diameter φ46 mm, jaw size: 92 W * 18 D mm
Volume and weight 65W * 241H * 35D mm, 450 g
Annex Connecting cable L9257*1, No. 7 alkaline battery (LR03) *2, carrying case C0203*1, instruction manual *2, precautions for use*1
محصولات مشابه