Shaanxi Qindiyuan Environmental Protection Equipment Co., Ltd.
leonleesale@aliyun.com 86--15389206502
상품
상품
> 상품 > 디지털 멀티미터 DMM > HIOKO AC Clamp Power Meter CM3286-50 Power Quality Meter, Industrial Clamp Meter Electrical Measurement Instrument

HIOKO AC Clamp Power Meter CM3286-50 Power Quality Meter, Industrial Clamp Meter Electrical Measurement Instrument

제품 상세정보

원래 장소: 일본

브랜드 이름: HIOKI

인증: CO

모델 번호: HIOKO AC 클램프 파워미터 CM3286-50

지불과 운송 용어

최소 주문 수량: 1

가격: $499–$699

포장 세부 사항: 표준 판지 상자 포장

배달 시간: 6~8주

지불 조건: 티/티

공급 능력: 99개/6-8주

지금 챗팅하세요
강조하다:
화염 센서 테스트:
녹음 기능:
최소/최대/평균
숫자:
3-3/4
구경 측정:
공장에서 교정됨
측정 기능:
저항, 연속성
입력 임피던스:
낮은
최대전류입력:
10A(보통 퓨즈형)
측정 기술:
2 x 4옴 4와이어
최대전압입력:
600V ~ 1000V(모델에 따라 다름)
치수:
모델에 따라 다름(일반적으로 휴대용 크기)
녹음 기능:
경과 시간이 포함된 최소/최대/평균
디지트 결의안:
5.5
정전용량 범위:
100mF
범주:
전기기사용 멀티미터
디스플레이 백라이트:
대형 백색 LED
화염 센서 테스트:
녹음 기능:
최소/최대/평균
숫자:
3-3/4
구경 측정:
공장에서 교정됨
측정 기능:
저항, 연속성
입력 임피던스:
낮은
최대전류입력:
10A(보통 퓨즈형)
측정 기술:
2 x 4옴 4와이어
최대전압입력:
600V ~ 1000V(모델에 따라 다름)
치수:
모델에 따라 다름(일반적으로 휴대용 크기)
녹음 기능:
경과 시간이 포함된 최소/최대/평균
디지트 결의안:
5.5
정전용량 범위:
100mF
범주:
전기기사용 멀티미터
디스플레이 백라이트:
대형 백색 LED
HIOKO AC Clamp Power Meter CM3286-50 Power Quality Meter, Industrial Clamp Meter Electrical Measurement Instrument
Quickly check current, voltage, power, and power factor

Quickly check current, voltage, power, and power factor

  • Display 4 parameters
  • at the same time • Power meter with measurable power of 5W and current of 60mA; It can measure up to 360kW power from 5W at a low current of 60mA
  • In addition to current, voltage, and power, simple accumulated energy and phase sequence can be measured
  • Operating system that supports fast measurement
  • Measured values can be transferred to a smartphone by holding the data and data can be recorded
  • quickly • GENNECT Cross can be performed for the 1st time~ 30th High Harmonic Analysis (When Wireless Adapter Z3210 is Installed)
Product feature name

CAT IV 600,CATIII 1000V

Basic parameters (1 year for accuracy, 1 year for adjusted accuracy)

*1) Phase angle calculated from the zero crossover of current and voltage

*2) Harmonics can be displayed using the application software (GENNECT Cross).

Measure the line Single-phase, three-phase (balanced, no waveform distortion)
Measurement items Voltage, current, voltage/current waveform peak, active/apparent/reactive power, power factor, phase angle*1, frequency, simple single-phase power
[When installing the Z3210*2] Voltage/current harmonics
Voltage range [Measurement range] 80.0 V~600.0 V, single range, basic accuracy 45-66 Hz: ±0.7%rdg. ±3 dgt., (Frequency characteristics: 45-1 kHz, true RMS)
Current range [Measurement range] 0.060-600.0 A, 3 ranges, basic accuracy 45-66 Hz: ±1.3%rdg. ±3dgt., (Frequency characteristics: 45-1 kHz, true RMS)
Power range [Single Phase] 0.005 kW to 360.0 kW
Basic Accuracy: ±2.0% rdg. ±7 dgt. (50/60 Hz Power Factor=1)
[Balanced three-phase 3-wire] 0.020 kW to 623.5 kW
Basic accuracy: ±3.0% rdg. ±10 dgt. (50/60 Hz Power Factor=1)
[Balanced 3-phase 4-wire] 0.040 kW to 1080 kW
Basic accuracy: ±2.0% rdg. ±3 dgt. (50/60 Hz Power Factor=1)
Harmonics When installing the Z3210*2: 30th harmonic level/content/total harmonic distortion rate of voltage and current
Other features: [Phase Angle*1] Ahead -180.0°~ Delay 179.9°
[Power Factor] -1.000 ~ 1.000
[Harmonics] 45.0Hz~999.9Hz
Peak, Phase Inspection, Max/Min/Average Display, Auto Hold, Meter Comparison, Unbalanced Three-Phase Power Estimation Display, etc
Dust and water resistance IP20 (Voltage measurement in a completely dry state, with jaws closed) IP54 (when stored)
Power supply No. 7 Alkaline Battery (LR03) *2
Continuous use time: about 25 hours (without Z3210 installed), about 18 hours (with Z3210 installed and wireless communication)
Other conditions: AC 100 A measurement, backlight off, 23°C reference value
Measurable conductor diameter φ46 mm, jaw size: 92 W * 18 D mm
Volume and weight 65W * 241H * 35D mm, 450 g
Annex Connecting cable L9257*1, No. 7 alkaline battery (LR03) *2, carrying case C0203*1, instruction manual *2, precautions for use*1